I have problem with studer D741 , when I select Cox Digital in , i have message " NO LOCK ". = no signal ?
XLR dig,XLR ana is working perfect .
can somebody help me ?
Thanks for answer , regards .
STUDER D741
Moderator: Administratoren
- Cinetech
- Administrator
- Beiträge: 155
- Registriert: Montag 6. Februar 2006, 23:41
- Wohnort: 6010 Kriens
Re: STUDER D741
Hi,
No Lock means that the PLL Sync Circuit cannot extract the Wordclock out of the Data Stream.
No Wordclock > No Synchronization > Signal cannot be used, therefore invalid since not locked to external sync.
Try to connect the signal to another device. When it locks there, it will be the input section of your D741 which is corrupted or the Clock extraction circuit is out of tolerance and fails. If no lock can be achieved, check the cable and check signal with an oscilloscope.
No Lock means that the PLL Sync Circuit cannot extract the Wordclock out of the Data Stream.
No Wordclock > No Synchronization > Signal cannot be used, therefore invalid since not locked to external sync.
Try to connect the signal to another device. When it locks there, it will be the input section of your D741 which is corrupted or the Clock extraction circuit is out of tolerance and fails. If no lock can be achieved, check the cable and check signal with an oscilloscope.
Es grüsst Patrick
<3m0
Hear your life in Dolby Stereo
See it in Ultra Panavision
<3m0
Hear your life in Dolby Stereo
See it in Ultra Panavision