Das STUDER und ReVox Forum

my erase head will not work i have changed with new erase head still not working please help

Your description is quite a bit short. Will you explain a little bit more what you have done e.g. testing the oscillator frequency and so on.

thank you for your reply i swapped the oscilator board from a parts unit now the erase head works but will not erase all the sound i have the head aligned properly demagnatized and clean still it will not completely erase ( maybe i need anew erase head)

Check the wires on the erase head. Most Revox and Studer machines have one pair reversed. It's supposed to be that way.
If you replaced the head and soldered the wires back with plus on the same side, that's likely your problem.

thank you all very much the problem is now solved it seems i have been barking up the wrong tree. it was not the erase head at all just bad tapes, i just got some new tape and the erase head is working perfectly again thank you

Wow... must have been VERY bad tapes.

Glad you solved it.

no the tapes were not that bad but had previously been recorded on 1/4 track machine i did not know that a 1/2 track machine could not erase tapes properly that had been recorded on 1/4 track

stugazz hat geschrieben:no the tapes were not that bad but had previously been recorded on 1/4 track machine i did not know that a 1/2 track machine could not erase tapes properly that had been recorded on 1/4 track

Hi stugazz,

that can't be. The voltage from a 1/2 track machine must be able to erase any tape!
There must be something wrong!

Alfred

Thank You Alfred, but then i just can't understand it,i spoke to a studer tech. in the USA and he advised me that either the tapes were really old or maybe they had been recorded on a 1/4 track format and if so the b-67 would not erase them properly so i put aside the tapes which were recorded on 1/4 track and tryed the ones only recorded on 1/2 track the tapes are identical in every way except that some were recorded on 1/4 track and some on 1/2 track the ones on 1/2 track the unit erases perfectly the ones on 1/4 track it erases them maybe 75% and when i record over them i can hear what was previously recorded underneath ?????

Hello,
I think you need a fulltrack erase head.
greetings
Erich